3. Disconnect the harness.
4. Remove the CLB bracket.
5. Replace the CLB board.
6. To re-install, follow these steps in reverse order.
Replacing the card cage convenience light
boards (CLB)
The card cage convenience light boards (CLB) provides extra illumination when needed for connecting
to the card cage.
Estimated replacement time: 2.25 minutes for servicing a single CLB
1. Remove the electronics-side cover (on page 36).
2. Remove the two screws securing the CLB.
3. Disconnect the one or two inline connectors, depending on which CLB is being removed.
The left CLB has one harness and the right CLB has two harnesses.
4. Remove the affected CLB with bracket.
5. Replace the CLB.
6. To re-install, follow these steps in reverse order.
Printed circuit boards and sensors
Boxer 4K Service Guide
102
020-101699-04 Rev. 1 (02-2018)
Copyright
©
2018 Christie Digital Systems USA, Inc. All rights reserved.
Summary of Contents for Boxer 30
Page 1: ...Service Guide 020 101699 04 Boxer 4K...
Page 113: ......
