Christie 1204, Installation And User Manual, Page: 8 / 46

CC2 Gas Barbecue Cooktop
(Part numbers 1204, 1205 and 1206)
8 |
General information
This appliance has been tested and certified to Australian Standards and RCM regulatory
requirements. The declaration of conformity certificate is available on request. The Product
Identification Label contains the following information:
•
The appliance type and model
• The gas type, including a colour-coded gas type panel
• Serial number
• Injector, test pressure, and gas consumption data
• Electrical requirements
• Manufacturers name and contact details
DO NOT REMOVE THIS PRODUCT IDENTIFICATION LABEL. CONTACT CHRISTIE
FOR A REPLACEMENT IF IT IS ILLEGIBLE OR DAMAGED.
Product safety features include a 6 second time delay start button located on the cooktop;
and an ignition safety timer with flame failure rectification sensor and maximum ignition
retry lockout.
1.6 Declaration of conformity
1.5 Conditions of use (continued)
• The gas supply from the bottle regulator to the gas inlet connection in the appliance
must be a copper tube or flexible hose compliant with AS/NZS 1869. Where the gas
supply passes through non-combustible material, it must be sealed with an approved
sealing compound
• For LPG and ULPG appliances supplied directly from a gas bottle (not via a reticulated
gas supply system), the gas cylinder must be fitted with an approved two-stage cylinder
regulator. The regulator is available from Christie
• Do not modify any part of the appliance without written authorisation from the manufacturer
• The manufacturer must approve all repairs conducted under warranty. Christie will not take
responsibility for any repairs made without prior authorisation
• This appliance is suitable for indoor and outdoor use
• The safety instructions in chapter 1.2 form part of the conditions of use for this appliance