manualshive.com logo in svg

Christie 1204, Installation And User Manual

Share
Download
Christie 1204 Installation And User Manual Download Page 24

CC2 Gas Barbecue Cooktop 

(Part numbers 1204, 1205 and 1206)

24 |  

Installation

2.3 Installation

STEP 6

Ensure the appliance aligns with the edges of the benchtop. Tighten the wing nuts so that 
the appliance does not move at all. 

STEP 7

• 

Connect the floor socket to the gas supply as per AS/NZS5601 or local regulations and 
connect the bayonet to the floor socket. Test the installation for gas leaks

• 

When using bottled gas, connect the appliance and bottle using proprietary fittings and 
pipes as per AS/NZS5601

• 

Connect the 1000 mm black power supply cord to the nylon one-way terminal on the 
240VAC to 12VDC transformer and turn on the power. The appliance must deliver an 
audible beep on connection to the electrical circuit

• 

When using a battery, ensure it is fully charged before connecting it to the appliance. An 
extension lead is included to connect the 1000 mm black power supply cord to the battery

• 

Position the battery under the appliance behind the waste container, or in free space within 
the cabinet. Do not store it in the same compartment as the gas bottle

• 

To avoid contamination with waste fats and oils, ensure that the leads and connections are 
secured neatly and do not run underneath the drain tube

Important:

 An audible beep must be heard upon connecting to the electrical circuit. If you 

do not hear an audible beep, please check the troubleshooting guide in this manual.

Note: 

Do not use the 240VAC charger while the battery is connected to the appliance.

Summary of Contents for 1204















































Reviews:

No comments

Brands by name

Popular brands

Load more brands