1
V3 (22.12.2018)
BATWING
i
s a flying wing of Christian Vogel in classic wood construction. A model with a very
large field of application, where the fun factor is never too short.
The particularities:
•
laser-cut all-wood construction
with dovetailed and weight-optimized
•
component-transport friendly due to two-piece wing with removable
•
winglets.
•
Surface protection by locking mechanism
•
optionally with motor nacelle for electric drive
The kit:
The wing is constructed with an intro leading edge, pine beams, balsa moldings, balsa planking and
various plywood and caiba plywood parts. The surfaces are constructed using a Depron stencil. The
laser-cut ribs are accurately positioned and positively positioned with the support feet in the
auxiliary template which allows a structure without a blueprint. The surface connection is handled
by a 10 x 2 mm CFK profile. The kit includes - in addition to the laser-cut and numbered
components - all articulated and small parts. Not included in the kit are adhesives, iron-on film and
RC components.
Necessary building material:
•
For the construction of the model we recommend a construction kit with the dimensions
800 x 300 mm
•
Superglue, white glue, UHU final
Recommended RC equipment:
•
Battery (4 cells Eneloop 750 mAh (AAA size)
•
3-channel receiver with normal range
•
2 x Graupner DES 427 BB
Technical specifications:
Span: 1262 mm
area: 30,02 dm²
sweep: 30° at the front.
Wing
loading: about 20 g/dm²
flight weight: +/- 600 g
Profil: ca. 8 Prozent
Setting values:
Neutral / Elevation + 4 mm
elevator + 12 / - 12 mm
Direction + 12 / - 10 mm
Center of gravity 197 mm (14 % Stabi)
Rudder deflection up to + 25 / - 20 mm are possible on site. It is recommended to program