Christ 112991 Operating Manual Download Page 47 | Manualshive

Page: 47 / 148

background image

Freeze-dryer Epsilon 1-4 LSCplus

Freeze-dryer Epsilon 2-4 LSCplus

5 Set-up and connection

Version 04/2014, Rev. 2.13 of 01/12/2021

• sb

47 / 148

Translation of the original operating manual

• Do not set up the vacuum pump directly next to the heat exchanger

(condenser).

• In the case of water-cooled systems, ensure that the water circuit

provides a sufficient amount of cooling water.

• Avoid direct sunlight (UV radiation).

Pos : 132 /010 Univ ers almodul e/ Leerz eile @ 0\mod_1202116244500_0.docx @ 114 @ @ 1

Pos : 133 /010 Univ ers almodul e/ Leerz eile @ 0\mod_1202116244500_0.docx @ 114 @ @ 1

Pos : 134 /200 Chris t/360 GT-BA Labor-Pil ot ( STAND ARDMO DULE)/050 Aufst ellung und Ansc hluss/ 050 Aufst ellung und Ans chl uss Epsilon/ 050-0020 Ver- und Ents orgungs ansc hlüss e Epsilon @ 48\m od_1490088361900_68.docx @ 492302 @ 2 @ 1

5.2

Supply and disposal connections

Pos : 135 /200 Chris t/360 GT-BA Labor-Pil ot ( STAND ARDMO DULE)/050 Aufst ellung und Ansc hluss/ 050 Aufst ellung und Ans chl uss Epsilon/ 050-0020- 0010 Energiev ers orgung Epsilon --------------------------------------- @ 48\mod_1490087247571_68. docx @ 492266 @ 3 @ 1

→

5.2.1

Power supply

Pos : 136 /200 Chris t/361 GT-BA Labor-Pil ot ( PROJ EKTE)/ Epsilon 4er/ Epsilon 1-4_2- 4 LSC plus Standar d/ 050 Aufst ellung und Ansc hl uss/ 050- 0020- 0010-0010 Ans chl uss art neu E1- 4_2- 4 @ 48\m od_1490346443622_68.docx @ 493183 @ 4 @ 1

→

5.2.1.1

Connection

DANGER

The operating voltage on the name plate must correspond to the local
supply voltage

Christ freeze-dryers are units of safety class I. Epsilon 1-4 LSCplus and
Epsilon 2-4 LSCplus units have a three-wire power cord with a
CEE 7/4 plug (type F) (see chapter 10 - "Technical data").

Pos : 137 /010 Univ ers almodul e/ Leerz eile @ 0\mod_1202116244500_0.docx @ 114 @ @ 1

Pos : 138 /200 Chris t/360 GT-BA Labor-Pil ot ( STAND ARDMO DULE)/050 Aufst ellung und Ansc hluss/ 050 Aufst ellung und Ans chl uss Epsilon/ 050-0020- 0010-0020 Sic herungen baus eits Epsilon @ 25\m od_1404984623550_68.docx @ 185665 @ 4 @ 1

→

5.2.1.2

Customer-provided fuses

The freeze-dryer must be protected by way of a customer-provided mains
fuse with the correct rating.

Pos : 139 /010 Univ ers almodul e/ Leerz eile @ 0\mod_1202116244500_0.docx @ 114 @ @ 1

Pos : 140 /200 Chris t/360 GT-BA Labor-Pil ot ( STAND ARDMO DULE)/050 Aufst ellung und Ansc hluss/ 050 Aufst ellu ng und Ans chl uss Epsilon/ 050-0020- 0020 Belüftung Epsil on 1 Ansc hlus s @ 48\m od_1490090398173_68.docx @ 492320 @ 3 @ 1

→

«
...
45
46
47
48
49
...
»

Summary of Contents for 112991





















































































































































Reviews:

No comments

Related manuals for 112991

Brand: MacDon Pages: 89

Brand: Yates Pages: 2

Brand: ParaBody Pages: 5

Brand: Sagola Pages: 20

Brand: Earmor Pages: 5

Brand: Rain-Flo Irrigation Pages: 16

Brand: IBS Scherer Pages: 64

Brand: Hacker Pages: 2

Brand: J.P. SELECTA Pages: 8

Brand: Haemonetics Pages: 134

Brand: Hadeco Pages: 72

Brand: J.P. SELECTA Pages: 32

Brand: Jacobsen Pages: 16

Brand: Jacobsen Pages: 20

Brand: Jacobsen Pages: 100

Brand: Quincy Pages: 31

Lyme FIA Sofia 2

Brand: Quidel Pages: 49

Brand: Quest Leisure Products Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands