5
■
Power supply
6. Operation
-
Connect the power cord to the driver as shown below, twist the knob on the power cord to secure it onto
the driver. Do not force the connection as this can cause damage to the driver and power cord.
-
To avoid accident and injury, check driver’s torque setting, and make sure that the work piece is fixed
firmly before operating.
-
Change torque settings: The driver comes with torque cover installed to prevent tampering of torque setting.
To remove the torque cover, first loosen the set screw located at the end of the front cover with included
allen key and remove the entire cover by turning it counterclockwise. Remove the Philips screw on the cover
and push out the inner torque cover from the back end. Reinstall the remaining cover, and now you will
have access to change the torque setting.
Model
Volume (mm)
Load
Voltage
(AC)
Output
Voltage
(DC)
Weight
(g)
Safety Approved
Feature
Length Width Height
APS-351B 164 64 42 100-240V
25-35V 300
CB,CE,UL(CUL),
ROHS,REACH
Adjustable
stepless output
voltage
Available Input
Voltage 110-
240VAC
Automatic device
application
AM-45
172
84
61
100-240V
25-35V
450
CB,CE,UL(CUL),
ROHS,REACH
Screw fastening
check
Screw counting
①
Set screw
②
Philips screw
Torque cover
Engraving ring
③
