Chore-Time Valego RDE-58, Instruction Manual, Page: 34 / 46

Installation Valego® RDE-58 with Flat Roof Instruction Manual
34
ME2489A
Full Section Walkover
1.Expulsion Shafts should be 3" past Side Panels. (See Figure 42.)
Note: Walkover Frame Covers, Egg Belt Covers, and Closures are installed the same for Full or Half Section
Walkovers See Figure 40 (on page 33) through Figure 41 . for better view of parts.
2.Install Walkover Frame Covers (Item 1) .
3.Install Walkover Egg Belt Covers (Item 2) .
4.Install Walkover Closures (Item 3) .
5.Install Expulsion Shaft Caps (Item 5) .
Expeller Installation
Expeller Panel Assembly
1.Install two Panel Lock Bushings (Item 1) per Expeller Panel (Item 2) .
2.Attach three Panel Clamps (Item 3) per Panel in the locations shown.
Figure 42.Full Section Walkover
3" [7.6 cm]
Item Description Part No.
1 Walkover Frame Cover 600812
2 Walkover Egg Belt Cover 600800
3 Walkover Closure 600923
4 15mm Connecting Pin 600732
5 Expulsion Shaft Cap 201038
1
2
4
4
3
5
Item Description Part No.
1 Expulsion Panel Lock Bushing 600789
2 Expeller Panel 600424
3 Expulsion Panel Clamp 600795
Figure 43.Assembling Expeller Panel
1
3
2