Valego® RDE-58 with Flat Roof Instruction Manual
Installation
31
End of the Row (Drive Unit End)
1.At the Drive Unit End Fasten a Nest Closure
(Item 1)
using 15mm Connecting Pins
(Item 2)
.
Walk Over Section
Walk Over Sections can be located at any location but it is recommended to be centered between Expulsion Units.
A Walk Over can be a full or half Section.
1.Install the parts on the Enclosed side of the Half Section Walkover the same as
through
. See the
Figure below
for additional parts needed for Half Section Walkover.
2
1
2
Item
Description
Part No.
1
Nest Closure
600923
2
15mm Connecting Pin
600732
Figure 37.Expulsion Unit Closure (Drive Unit End)
Flange Bent outward
Figure 38.Walkover Section Full/Half
Full Walkover
Half Section Walkover
Item
Description
Part No.
1
Half Section Entrance Board 47-3/16" [1198mm]
600570
2
Half Section Side Carriage 47-1/4" [1200mm]
600263
3
Half Section Back Panel [588mm]
600917
1
2
3