Tools Needed and Supplies
57" Endura
®
Fan
6
MV2406P
Tools Needed and Supplies
3/8" socket, 1/2"socket or wrench, Side cutters, 1/4" nut driver, Motor power cord, Wire nuts / terminals, Optional
screw hook installation tool (CTB part number 13150-1), Caulking, 5/32" allen wrench (un-assembled)
New Installation Planning
Planning the layout of the spacing between Fans is very important. Spacing too close together will cause interference
between the discharge Cones.
5" [12.7cm]
!Important:
Provide Shelter over Cones in areas where
snow or ice could cause damage. CTB Inc. Warranty
Does
Not
cover damage from external sources.
1-3/4" [4.4cm] required at
the bottom of the opening.
Important!
Fan
mounting
surface must be flat.
60-1/16" [152.5cm]
Minimum Spacing if
sides of Cone are flat-
tened
(See page 17)
.
72" [182.9cm]
Recommended Spacing
13-11/16" [34.8cm] Inside Wall to Screen
Minimum Wall Thickness 3-1/2" [8.9cm]
42-13/16"
[108.7cm]
56-5/16"
[14
3cm]
Square
70-1
/8" [
178.1cm]
60
-1/8" [152.7cm]
4-5/16"
[10.9cm]
5-11/16" [14.4cm]
57-1/16
" [
14
4.9
cm] M
ax
.
55
-5
/8
" [
141.3
cm]
M
in
.
60-1/4"
[
1
53cm]
60-1/4" [153.0cm]
57-3/8" [145.7cm] Max.
55-1/4" [140.3cm] Min.