57" Endura
®
Fan
Installation
MV2406P
25
Screen Assembly
2. Install a spring (54480)
in the
upper left corner
following
steps A through D below. After
Step D is complete go to step 3.
A) Slide a Spring (54480)
over both Screen Panel Wires
exactly as shown.
B) Rotate the Spring Counter-
Clockwise until the end of the
Spring snaps over the Side Panel
Wire.
C) Slide and Pull Spring over
Corner Panel Wire.
D) Twist Spring Clockwise until it is passed
the outside wire and snapped firmly in place.
1. Fold the Screen Sides as shown.
3. Rotate the Screen in the direction
shown installing a Spring at a second
corner.
Repeat for remaining Corners.
Pull
Install Spring
per steps A-D
below.
Install a Spring
at each corner.
Adjust Screen Panels so
they are as even as possible
Spring snapped firmly
between wires.
Corner Wire
Slide
Snapped over Side Panel Wire