16
Selecting the input source
Press the Line- or Line+ keys on the centre control to cycle through the inputs.
For convenience you can directly access the first 5 inputs using the buttons at the bottom of the remote control.
The main everyday Bus A inputs are on the left whilst the Bus B inputs are on the right.
Press the button marked BUS A to select Bus A so you can listen to the source connected to this bus. Press the button marked BUS
B to select Bus B so you can listen to the source connected to Bus B. Bus B inputs are shown with dots underneath.
( As an example you can listen to your CD player on Line1 Bus A whilst recording the radio on Line2 Bus B. Press BUS B then
Line2. Start recording. The press BUS A then Line1 to listen to the CD player. )
Adjusting the volume
Press the Vol+ button on the centre control to increase the volume, press the Vol- button on the centre control to decrease the
volume.
Adjusting the balance
Press the Bal+ button to move the balance towards the right. Press the Bal- button to move the balance to the left.
Changing the output
Press OP1 to select the main output. Press BYPASS (OP2) to select AV Bypass output. OP1+2 has no function on the CPA5000.
Mute
Press the mute key to mute the CPA5000.
To un-mute
Press the mute key again, or select an output, or change the volume.
