12
Everyday use of your CPA5000
Turning on your CPA5000
Press the power button on the front of the CPA5000. Press again to switch off.
Select the input source
Press and hold button A on the front panel to select Bus A. Your CPA5000 should be set to Bus A for normal operation
and the display will read the last selected input with no dots underneath. The selected input will automatically be sent to
the tape recording T1 phono outputs:
To assign the main output with a particular input signal, press button A and release several times to cycle through the 7
line inputs until the one you wish to use is displayed. The options are shown in the diagram below:
Cycle of input selection options for Bus A
