Chopin QUATUOR, User Manual

Page: 57 / 74

QUATUOR
Section 4 Making adjustments and calibrations 57
User’s manual

10/2016
3. Creating or
modifying a
calibration
The user can enter up to 21 grain calibrations in the QUATUOR.
■
For
creating
a new calibration:
❏
select "
Untitled
" from within the maintenance menu,
❏
clear this name with the backspace key of the keyboard,
❏
enter the new calibration name by means of the keyboard then
save it ( "Editing the grain name", page 42 ).
Note
To suppress a calibration, select it, then clear its name by using the
keyboard (it then disappears from the list), and save.
■
The calibration being selected, it can then be configured by using
following menus:
❏
"Editing the blower power (in percentage)", page 43 ,
❏
"Editing the sieves speed (in percentage)", page 44 ,
❏
"Changing configuration of sieves B3 and B2", page 45 ,
❏
"Changing results to be printed", page 46 .
■
Choosing the sieves:
The punching size of the QUATUOR sieves are either:
❏
the one used in flat sieves, or
❏
more generally the latter increased of a few 1/10th of mm, or
❏
special (sieves "Spe").
Note
The procedure is the same for
modifying
an existing calibration:
simply select its name in place of "
Untitled
".
➞