Chopin QUATUOR, User Manual

Page: 18 / 74

QUATUOR
18 Section 1 Installation and setup
User’s manual
10/2016
5. IElectric connection
The QUATUOR is an electronic apparatus which must be connected
to an electrical network equipped with an Earth terminal. Above all,
verify the condition of this connection.
In addition, the electrical network must be equipped with an RDD
(Residual Differential Device) of the AC grade with a sensitivity

30 mA.
For the connection to the network, use the power cord provided with
the QUATUOR.
The mains plug and the
I/O
switch are located at back of the appa-
ratus.
6. Powering up the unit
■
Turn the On/Off switch to ON. The QUATUOR runs a self-test
sequence, checking most of its functions (memories, INIT parame-
ters, motors, scales, etc.); during this sequence, which lasts 1 min
approx., all commands (by means of the touch screen or a key-
board) are inactive.
■
During this self-test sequence are displayed:
❏
the name of the apparatus,
❏
the software version,
❏
successively the different test phases described in table below
.
blower
sieve control
M4
B1
B3
M1
B2