ChoiceMMed MD300I Instruction Manual Download Page 11

INSTRUCTION  MANUAL

PULSE  OXIMETER

MD300I

MD300I

- 16 -

- 17 -

Our company will update the system software free of charge.

5.4.2 Exempt and Limitation

a) Our company isn’t responsible for such damage caused by force majeure. For example: 
fire, thunder flash, flood, cyclone, hail, earthquake, house collapse, commotion, plane failing 
and traffic accident, deliberate damage, lack of fuel or water, labor and capital bother, strike 
and stop-working etc.
b) No-service offer
The corresponding charge and insurance charge of disassembling, refurbishing, repackaging 
and moving the oximeter or the part of it.
The damage caused by the third company not commended by our company to adjust, install, 
replace the parts of the oximeter.
The damage and failure caused by user or its representative doesn’t comply with the 
operator’s manual.
c) The oximeter is installed or connected with such external device without our company 
permission as printer, computer, net line and lead to oximeter failure. Our company will 
charge for the maintenance.

d)

 

Responsibility limitation

During the period of maintenance contract validity, if user changes the parts manufactured 

by other manufacturers without our company permission, our company is entitled to stop 

contract.
5.4.3 User Guarantee
a) Please read user manual carefully before operation.
b) Please operate and make daily maintenance as request of manual and guarantee.
c) Power supply and environment.
5.4.4 No-guarantee Principle
• 

There is no-dispelled smut and not-original mark in the crust.

• 

There is physical damage on oximeter and its accessory.

• 

There are liquid leftover and eyewinker on oximeter, which may lead to short circuit 
and plug board failure.

• 

All the probe and accessories belong to consumption and beyond free change range.

• 

Such damage of probe caused by mechanical force doesn’t belong to free change 
range.

• 

During measurement of SPO

2

, principle leads to measuring value difficultly or 

inaccurate measurement.

• 

Not-original package leads to damaging oximeter during transportation

• 

Not our company professionals or authorized personnel disassemble oximeter and 
lead to oximeter failure.

• 

Not carefully read manual and so wrong operation lead to oximeter damage and 
failure.

5.4.5 User’s Special Request for Guarantee Time
Our guarantee constitution for oximeter complies with electronic product after-sale service 
standard regulated by national laws. We regulate the guarantee time of hoist board is one 
year and all the accessories are three months. If users request the guarantee time beyond 
our regulated guarantee time, we should take it into consideration. Because electronic 

product has such character of quick changing, for such user asking more than three years 

guarantee time, our company will not sell oximeter parts during maintenance. Our company 

will upgrade oximeter or change new maintenance methods, for this, we charge the lowest 

price for new oximeter with user permission.
5.4.6 Repackage
• 

Take all the accessories and put them into plastic cover.

• 

Try to use original package and packing material. User will be responsible for such 
damage caused by bad package during transportation.

• 

Please offer guarantee list and copy of invoice to standby with the period of guarantee.

• 

Please describe failure phenomenon in detail and altogether offer oximeter.

Storage and Transportation
Storage: Storage Temperature -20

℃ 

~ +55

, Relative Humidity ≤93%, no condensation.

Transportation: Transport by airline, train or vessel after packing according to request.
Package
Pack the product with the hard bag, and put the foam between the inner box and the carton 
to alleviate the shake.

Summary of Contents for MD300I
















Reviews: