press the “ON” button on the remote controller in the
coming 5 sec. The lamp flickers twice that means All-
ON function setting is successful. Press the button
again to quit pairing.
Delete:
Power off the lamp first. Press the button on the
switch for 20 sec. Then the lamp turns “ON-OFF-ON-
OFF” that means all the paired remote controllers with
this button are deleted.
Tips
1) If you want to add a new remote controller, please do
the pairing as above pairing settings.
2) Each button on the switch can pair 20 groups of
codes. when pair 21st, the first one will be covered.
3) If you pair one button which has already paired, it will
quit pairing settings.
4) The remote controllers can be paired continuously
while in pairing setting if the time is not over 5 sec
after last pairing.
5) All the buttons should be paired to ON/OFF button to
realize All-ON/OFF function with the remote controller.
--5--
