V Pairing Method
When you use the switch at first time, the switch just can
be switched on/off manually, you should do the pairing
to the remote controller first as the below step:
Single ON/OFF:
Power off the lamp first. Press the button on the
switch for 5 sec. Then the lamp turns “ON”, press the
button on remote controller in the coming 5 sec. The
lamp flickers twice that means the Single ON/OFF
function setting is successful. Press the button again
to quit pairing.
All-OFF:
Power off the lamp first. Press the button on the
switch for 10 sec. Then the lamp turns “ON-OFF”,
press the “OFF” button on the remote controller in the
coming 5 sec. The lamp flickers twice that means the
All-OFF function setting is successful. Press the
button again to quit pairing.
All-ON:
Power off the lamp first. Press the button on the
switch for 15 sec. Then the lamp turns “ON-OFF-ON”,
--4--
