Kinetec Kinevia™ / Kinetec Kinevia Duo™
EN
21/44
You will see the success of your training because your muscles become increasingly relaxed and the motor
contributes less power than before for continuous pedal rotation.
You can adapt your training gradually depending on your physical condition and your progress.
Using the touch screen
The touch screen has a high quality 7 inch display. All the functions are triggered by pressing the corresponding zones
with the fingertips. The screen is adjusted to only react to light pressure to avoid unintentional actions. Use the index
finger, the middle finger or the thumb to press the screen.
Main menu
The main menu is displayed a few seconds after powering on.
You can select from the following options:
Quick start:
used to directly access the start of training using the previously set standard training (see section 9.1 on
page 29).
Guided training:
accesses the pre-programmed training selection screen for various pathologies (see section 9.2 on
page 29).
Individual training:
accesses the selection of other training without pre-settings (see section 0 on page 32).
Training analysis:
displays the training synthesis after a session has been completed (see section 10 on page 32).
Statistics:
displays the overall assessment of all your completed training sessions using a long term view (total and
mean values) (see section 0 on page 34).
Settings:
accesses the menu to update preset parameters and device parameters (see section 0 on page 34).
Service:
this key is locked by a 4-digit code and can only be accessed by maintenance technicians. The service menu
can be used to apply updates, for example.
Standby:
activates standby mode. This key must be pressed for 5 seconds to avoid any unintentional activation of
standby mode. The screen turns off as soon as standby mode is activated. To reactivate the device from standby
mode, press anywhere on the screen for about 5 seconds (see section 6.10 on page 19).