ChiQ U58G5500, Operation Manual

Page: 16 / 195

Basic Operation
•
Select the antenna type (Air, Cable and Satellite).
Press the buttons to select the tuning modes and then press the
OK
button.
(For more detailed information, please refer to Channel menu → Auto Tuning).
Press the ► button to go to the next step. Press the ◄ button to go to previous step.
•
The TV starts Auto Tuning.
NOTE:

If the TV doesn't receive any channels, please check your aerial connection or the
country you selected, and then try an auto search again.

If the TV just receives some of the channels, it means the aerial's reception isn't good
enough and an antenna service is recommended.
Programme Selection
• Using the on the remote control.
Press
P
Press
P
to increase channel number.
to decrease channel number.
Volume Adjustment
•
Press the + - on the remote control to adjust the volume.
•
If you want to switch the sound OFF, press the .
•
You can release mute by pressing the or increase the volume.
Changing the Input Source
1.
You can select the input source by pressing the
SOURCE ( )
button on the remote
control.
2.
Press the arrow button to cycle through the input source, and press the
OK
button to
confirm your choice.
▲/▼
Using 0- 9 Digital Buttons.
You can select the channel number by pressing 0 to 9. Example:
To select - channel (e.g. Channel 5): Press 5.
To select -- channel (e.g. Channel 20): Press 2 and 0 in a short time.
•
14