9
If the appliance is placed on its back or side during
this process it must be allowed to stand upright for 6
hours before plugging in to avoid damage to internal
components.
1. Remove the screw hole cover from the top left side of
the cabinet. Remove the upper hinge cover and the
upper hinge from the top right side of the cabinet.
Remove the freezer door from the cabinet.
2. Remove the center hinge from the right side of the
cabinet. Remove the refrigerator door from the cabinet.
Remove the screw hole covers from the left side of the
cabinet. Remove the refrigerator door from the cabinet.
3. Remove the lower hinge from the bottom right side of
the cabinet. Remove the adjustable foot from the lower
left side of the cabinet.
4. Remove the washer and nut that secure the hinge pin
to the hinge, then remove the pin and screws. Install
the pin and screws with the washer and nut into the left
hole on the hinge.
5. Install the lower hinge onto the lower left side of the
cabinet. Install the adjustable foot on the lower right
side of the cabinet.
6. Remove the door stops from the lower right side of the
refrigerator and freezer door and move them to the left
side of the doors.
7. Move the door bushing from the top right side of the
refrigerator door and remove the hinge hole cover
from the top left side of the door. Exchange their
positions.
8. Install the refrigerator door onto the cabinet. Install the
center hinge on the left side of the cabinet. Install the
screw hole covers on the right side of the cabinet.
9. Install the freezer door onto the cabinet. Install the
upper hinge on the top left side of the cabinet. Install
the screw hole cover onto the top right side of the
cabinet.
Note: These instructions reference the models that come
from the factory with a right hand swing door. If your
appliance comes with a left hand swing, ensure that you
fl ip the “left” and “right” in these instructions.
Simple fault analysis and elimination
With regard to the following small faults, not every failure needs to be fixed by the technical service personnel; you can try
to solve the problem.
Case
Inspection
Solutions
•
Completely
non-refrigeration
•
Is power plug off?
•
Are breakers and fuses a broken?
•
No electricity or line trip?
•
Re-plug.
•
Opening the door and checking whether the
lamp is lit.
•
Abnormal noise
•
Is refrigerator stable?
•
Does refrigerator reach the wall?
•
Adjusting refrigerator's adjustable feet.
•
Off the wall.
•
Poor
refrigerating
efficiency
•
Do you put hot food or too much food?
•
Do you open the door frequently?
•
Do you clip food bag to the seal of door?
•
Direct sunlight or near a furnace or stove?
•
Is it well-ventilated?
•
Putting food into refrigerator when hot food
becomes cool.
•
Checking and closing the door.
•
Removing the refrigerator from the heat
source.
