5
1. Standing time
After the refrigerator is properly installed and well cleaned, do not switch it on immediately. Make sure to energize the
refrigerator after more than 1 hour of standing, so as to ensure its normal operation.
2. Cleaning
Confirm the accessory parts inside the refrigerator and wipe the inside with a soft cloth.
3. Power-on
Insert the plug into the solid socket to start the compressor. After 1 hour, open the freezer door, if the temperature inside
the freezer compartment drops obviously, it indicates the refrigeration system is working normally.
4. Storage of food
After the refrigerator runs for a period of time, the internal temperature of the refrigerator will be automatically controlled
according to the user’s temperature setting. After the refrigerator is fully cooled, put in foods, which usually need 2~3
hours to be fully cooled. In summer, when the temperature is high, it takes more than 4 hours for the foods to be fully
cooled (Try to open the refrigerator door as less as possible before the internal temperature cools down).
If the refrigerator is installed in the moisture place, make sure to check whether the ground wire and leakage circuit
breaker are normal. If vibration noises are produced due to the refrigerator contacting the wall or if the wall gets blackened
by air convection around the compressor, move the refrigerator away from the wall. Setting up the refrigerator may cause
jamming noise or image chaos to the mobile phone, fixed-line telephone, radio receiver, television set surrounding it, so
try to keep the refrigerator as far away as possible in such case.
Functions
START
When the refrigerator is powered on for the first time, the indicator lights of Temp. mode get fully illuminated for 2 seconds. After
that, the refrigerator will run at Mode 5 by default.
Door-open overtime alarm
When the fridge door is kept open for more than 3 minutes,alarm sounds will be issued by the buzzer.
Pressing "SET" control key will suspend the alarm for 3 minutes. When the fridge door is closed, the alarm gets stopped.
Fridge temperature adjustment
Temperature can be adjusted by pressing the SET key. In the case of temperature adjustment, the indicator light of the
corresponding temperature mode gets flashing; and if no key operation within 5s, the setting will be validated. The temperature
adjustment cycles in the following manner: Mode 5
→
6
→
8
→
FAST COOL
→
2
→
4
→
5
→
6.
FAST COOL
The refrigerator temperature is cooled down in a quick manner, so as to ensure food nutrition gets not lost and tastes are fresh.
The Fast Cool function keeps working for a maximum period of 3 hours. After that, it will automatically exit, with the temperature
mode restored to that set before the Fast Cool function is enabled.
TEMPERATURE SELECTION
Refrigerator
temperature adjustment
：
Fridge temperature control board adjustment
（
Mode 2
、
4
、
5
、
6
、
8
）
Ambient temperature
Suggested Modes
Method
In summer(Higher than 32
℃
)
6
，
8
Press "SET" first, and then adjust the mode
Normal
4
，
5
，
6
In winter (Lower than 13
℃
)
2
，
4
When in need of fast cooling
Fast Cool mode
Failure alarm
When the indicator light of Mode 2 or Mode 5 keeps flashing, it indicates the refrigerator failure. Please contact the after-sales
service personnel for visiting service as soon as possible
Freezer temperature adjustment
1.When the fridge temperature control gear remains the same, adjust the freezer air
adjustment lever to the position "MAX" to provide the maximum amount of cool air, thus
making the temperature inside the freezer compartment the lowest.
2. When the fridge temperature control gear remains the same, adjust the freezer air
adjustment lever to the position "MIN" to provide the minimum amount of cool air, thus
making the temperature inside the freezer compartment the highest.
During the actual use, the freezer air adjustment lever may get frozen as a result of high humidity or frequent opening of
the door. In such case, do not adjust the air lever by force. Instead, you are suggested to heat the air adjustment lever
locally using a hot towel to make the frozen air lever thaw before adjusting it, so as to avoid it from being damaged.
Instructions for food storage
Precautions for use
The appliance might not operate consistently (there is possibility of defrosting or temperature becoming too warm in
