Digital Pumpe-düse Power Chip - Installation Guide
Chiptuning Direct ApS • www.chiptuning-direct.com • [email protected]
Page 4
NOTICE!
Make sure that you have heard the plug »click« into place. Otherwise you may risk that the chip
does not function properly.
Now, attach the cable kit’s red cable to the
positive battery terminaland the black cable to the grounding.
It is very important that the the Power Chip is mounted in due distance of the engine and without
risk of impact of water or vibrations!
At last, check one more time that all connections are properly connected. Remount all removed
shields and your Digital Power Chip is ready for use.
Calibration of the Power Chip
Bring the vehicle on operating temperature. (Approx 90C / 5 minutes).
Switch off the ignition And install the Power Chip again.
The calibration phase needs at least 45sec in th etick-over. As long as the LED’s (red and yellow)
flash alternately do not press the operatior.
The module calibrates itself automatically. The calibration phase ends if the red LED lights up con-
stantly and the yellow LED flashes.
Switch off the ignition. Now the system is ready for the test run.
Test and adjustment of the Power Chip
The digital construction of the power chip allows you to choose the program which is best suited to
your car model, engine capabilities and individual preferences.
ROUND PLUG
