Chipset Communication UTV-100A1 User Manual Download Page 22

22-23 

 

TROUBLESHOOTING TIPS    

                                                                                                                                                                       

This section describes the general troubleshooting tips regarding to the installation or 
operation of the 

USB DISPLAY DEVICE

.     

 

Known Issues   

    - Windows Vista Aero mode support will be available at MP version driver update (

WDDM

).  

     

 

WDDM

 driver update is also aimed to resolve most of video playback compatibility 

issue   

   under Windows Vista.   
  - Direct 3D is not supported under XP. It would be supported under Vista Aero mode.     
 

General Recommendation   

- Check to make sure that the device is plugged in correctly to the host system.   
- Make sure that the USB port that you are using is USB 2.0.     
- Unplug the USB cable of USB graphics device and re-insert it.     
- Check to see that the monitor is connected correctly and is powered ON.     
- Make sure to restart your computer after the driver installation.     
- Try a different USB 2.0 port and/or computer.   
- Unplug all other USB devices from the system.     
- Try connecting the USB cable of USB graphics device directly to the computer instead of     
 through a hub.   
- Reset / refresh/resynchronize your monitor.   

 

Media Playback   

- During video playback on all platforms, please do not change the display mode, position       
  or arrangement of video player window (such as dragging the video player window       
  between main display and attached display). This usually causes the video player to have       
  strange behavior and the video may stop playing. We suggest stopping the video     
  Play back, moving the window to the USB graphics device attached display and then   
  selecting the video clip to start playing.       
- You may experience poor video performance on USB graphics device attached display     
  under some low-spec PC system.   
- Video rendering using hardware overlays is supported.   
- Some DVD playback software packages do not support playing on a second display   
  adapter of any kind. You may try to open the media player in the secondary display first   
  before start playing the DVD.   
- Your PC may be lack of certain video codec to support playback of certain video format.     
  Please use the link below to install license free media codec.   

     

K- Lite:

     

http://www.free-codecs.com/download/K_Lite_Codec_Pack.htm

 

Summary of Contents for UTV-100A1
























Reviews: