4
• Follow exactly the instructions and the sequence for installing and using the product from the
text and illustrations enclosed in the manual.
• Check the security of fixing after each operation!
•
ALWAYS CHECK THE SECURITY OF FIXING OF THE SAFETY-BELTS!
IMPORTANT!
1 – CORRECT HEIGHT OF THE SHOULDER BELTS
IMPORTANT!
The shoulder belts must be at child’s shoulders level.
2 – SECURING THE CHILD WITH CAR SEAT 5-POINT SAFETY BELT
Note:
Make sure that safety belt is locked as pulling the shoulder belts upwards. To unlock the safety
belt press the button at central buckle and split the belts.
3 – LENGTH ADJUSTMENT OF SAFETY BELTS (LOOSENING AND TIGHTENING)
3-1 Tightening
3-2 Loosening
Note:
Pull the shoulder belts, not the soft shoulder pads!
4 – HEAD SUPPORT ADJUSTMENT
Pull the lever for head support adjustment and set the hear support downwards or upwards.
Make sure that head support is in correct position!
5 – RECLINING
Car seat has 4 recline positions.
Position
“R”
– to be used only when car seat is installed “REARWARD” facing, mass groups 0+ and I.
Position
“1, 2, 3”
- to be used only when car seat is installed “FORWARD” facing, mass groups I, II
and III.
Pull the level for recline function and set the car seat in required position.
IMPORTANT!
Make sure that car seat is fixed in required recline position.
6 – REMOVING THE SHOULDER BELTS FROM METAL BUCKLE
7 – REMOVING THE SHOULDER BELTS FROM CAR SEA
T
Loosen the fabric cover and set the hear support is highest position. Pull the shoulder belts from the
slot at head support.
8 – REMOVING THE CROTCH BELT AND SOFT PAD
Adjust the recline at position
“R”
. Rotate the locking buckle and thread it through the opening at the
bottom of car seat. Remove the crotch belt and soft pad.
Car seat must be installed on the vehicle seat with 3-pint vehicle belt.
9-1
– Pull the level and set the recline of car seat in position
“R”
.
Note:
Seat must be maximum reclined when installing the car seat in position REARWARD facing.
9-2
– Place the car seat on the vehicle seat in REARWARD facing position and make sure it snug well
the vehicle seat backrest.
9-3
– Thread the diagonal belt of vehicle seat through the belt guide and clip for the belt at one side.
After that thread the lap belt above the base of car seat.
9-4
– Insert the vehicle belt ending into the buckle at vehicle seat until you hear a click sound.
Note:
Make sure that vehicle seat buckle is securely fixed as trying to pull the belt upwards.
9-5
– Place the child in car seat. Make sure that shoulder belts are at correct height and lock the car seat
5-point safety belt. Make sure belts are not twisted.
INSTALLATION OF CAR SEAT AND SECURING THE CHILD WITH WEIGHT
FROM 0 UP TO 18 KG GROUPS 0+ (0-13 kg) and I (9-18 kg)
Car seat position „REARWARD” FACING
