3
INSTRUCTIONS FOR FITTING AND FUNCTIONS
ASSEMBLY
WARNING!
FOLLOW EXACTLY THE INSTRUCTIONS AND SEQUENCES FOR ASSEMBLY AND US-
ING THE PRODUCT FROM THE ENCLOSED INSIDE FIGURES.
WARNING!
CHECK THE SECURITY OF FIXING AFTER PERFORMING ANY OPERATION
Required tools for performing some operations: screwdriver (not included).
The toy assembly operations are numbered from Step 1 to Step 8.
Functions of the toy are numbered 1 to 3.
Use the descriptions below along with the illustration bearing the same number.
STEP 1 – ASSEMBLY OF J-SHAPED STICK
From the lower end of the car body pass the straight edge of the j-shaped stick until it is shown through
the steering wheel tube opening from the top edge of the dashboard
STEP 2 – ASSEMBLY OF THE SAFETY BAR FIXED PART AND THE STEERING WHEEL.
Step 2-3 – Fix the steering wheel with screw and nut
STEP 3 – ASSEMBLY OF THE BACKREST
STEP 4 – ASSEMBLY OF THE CANOPY. PARENT PUSHBAR
Step 4а – Assembly of the connecting tube and the parent pushbar (1). Fix with 2 screws and nuts (2).
Step 4b – Assembly of the canopy. Fix the canopy to the stick with screw and nut.
STEP 5 – ASSEMBLY OF THE PARENT PUSHBAR TO THE BODY OF THE CAR
Insert the parent push bar to the body (1) and fix with screw and nut (2).
STEP 6 – ASSEMBLY OF THE SAFETY BAR
Mount the safety bar to the backrest by means of thumb latches (a). Insert the arms of the safety bars
to the safety bar fixed part (b).
STEP 7 – ASSEMBLY OF THE CUP HOLDER
Use a screwdriver (not supplied) to secure the cup holder to the parental control handle.
STEP 8 – ASSEMBLY OF THE CANOPY TO THE BACKREST
Note:
Make sure the canopy is firmly and securely assembled!
Step 1
Step 2
Step 3
1
2
3
