background image

1

  This product represents "universal" child restraint system for use in motor vehicles fitted 

with approved 3-point car safety belts with retractor. It is suitable for children weighing 9 – 36 

kg, groups I, II and III and is approved under No. E24-44R-040015. 

It must be used in forward facing position in the vehicle. The car seat holds the child in such 

position that even when the child is asleep, he/she receives the required protection.

This child restraint is designed and manufactured in compliance with the requirements of 

Regulation 44 of the United Nations Economic Commission for Europe concerning the safe 

transportation of children, the provisions of the product safety directive 2001/95/EU of the 

European Parliament and The Council and Directive 91/671/EEC "Compulsory use of seat 

belts and child restraints systems for child occupants of power driven vehicles" of the European 

Parliament and The Council, as well as the normative acts of the national legislation.

 

ATTENTION!

 Your child will be under maximum protection of this system, if you follow 

these instructions and recommendations thoroughly! Following the instructions will ensure 

your child getting the maximum safety designed into the restraint system during the time of use 

of the product. 

 

Do not forget that no system can provide absolute protection of injury in the case of a crash 

or road accident. Drive with attention, when there is a child in your vehicle! You are the solely 

responsible for the safety of your child, if you fail to follow exactly the instructions and safety 

recommendations in this manual!

 

Pay special attention to the warnings and apply all necessary precautions in order to avoid 

the risk of possible serious injury to your child thus ensuring its safety! If you fail to follow the 

safety recommendations, the instructions for use, assembly and maintenance, it can lead to 

serious injury or damage to your child.

  Make sure that everybody who uses this car seat reads, understands and follows the 

manual. 

 

NOTE:

 The construction of this universal car seat is meant for mounting on most automo-

bile seats. A complete suitability exists if the manufacturer has declared this in the accompany-

ing documentation of the vehicle. If you are not sure, you can consult with the retailer, the 

manufacturer of the car seat or the operating service.

Summary of Contents for FELICE













Reviews: