3
3 – ASSEMBLY AND REMOVAL OF REAR WHEELS
3-1 – Assembly of rear wheels.
To remove the rear wheels, press the pins on inside of the frame and pull the axle with the rear wheels.
3-2– Parking device.
CAUTION!
Always engage the parking device, when the stroller is stationary to avoid the risk of slipping
of the stroller!
4 – ASSEMBLY OF CANOPY
Press the brackets on the canopy on both side tubes and press until you hear click sound. Fix the can-
opy to the frame using the hook and loop fasteners.
CAUTION!
Always attach the canopy to the backrest to prevent the baby to fall and injure!
5 – FOLDING AND UNFOLDING THE CANOPY
5 (1) – Unfolding the canopy
5 (2) – Folding the canopy
6 – LEG REST
Press the two buttons on the leg rest simultaneously and move the leg rest to lower position. To lift the
leg rest, just push it with your hand until you hear a click sound.
7 – BACKREST RECLINE ADJUSTMENT
7 (1) – Press the button on backrest to adjust it;
7 (2) – Move the mechanism:
• Up – in order to move the backrest from lower to higher position;
• Down – in order to move the backrest from higher to lower position.
CAUTION!
BABY
UNDER
6 MONTHS TO
BE
PLACED
ON
THE
SE
AT ONLY WITH
THE
BACKRES
T,
ADJUSTED IN
THE MOS
T
RECLINED (FL
AT) POSITION!
8 – RESTRAINT SYSTEM (safety belts).
А
– central buckle
Adjust the shoulder and waist straps using the sliders
(B)
.
ATTENTION!
Belts must be snug to child’s body and must not be twisted
CAUTION!
Periodically check to ensure that the seat belt is securely attached to the stroller frame as
well as securely fastened. The belts should not be worn or torn, and plastic buckles and fasteners must
be sturdy, free of damage and secure.
ATTENTION!
When using the seat for newborn baby, before placing the child into the stroller, you must
unfasten the belt and put the sshoulder and waist traps to the sides of the stroller and cover them with
thin pad.
9 – FOLDING THE STROLLER
IMPORTANT!
Before folding the stroller, always activate the parking device and empty the storage
basket.
9 (1) – Fold the canopy;
9 (2) – Position the backrest in most upright position;
9 (3) – Pull and lift up the second lock;
9 (4) – Lift the lower locking mechanism and press the handles down until stroller is full folded;
9 (5) – Fasten the transport hook.
