3
1 - UNFOLDING THE STROLLER
2 - FRONT WHEELS
2-1 Front wheels installation
2-2 Front wheels removal
2-3 Straight and swivel motion of the front wheels
For straight motion press down the lever until it fist in the groove and you hear a click.
For swivel motion, lift it up.
Note:
When you move the stroller on uneven surfaces, it is recommended to fix the wheeels in
straight motion.
3 - INSTALLATION AND REMOVAL OF REAR WHEELS
4 - PARKING DEVICE FUNCTION
5 - INSTALLATION AND REMOVAL OF SAFETY BUMPERS
6 - CANOPIES
CAUTION!
Always attach the canopies at the back of the seats in order to prevent the children from
sliding off and injury.
Place the canopy, close the zipper and insert the two ends of the canopy to the frame until you hear
click.
To remove the canopy, press the buttons on its two sides and pull it out.
7 - REMOVAL OF SEATS’ SAFETY HARNESSES
(when seat is transformed into carry cot)
Thread the buckles through the openings of the seat and the upholstery (7-1) and remove them (7-2),
as shown in the picture.
8 - RESTRAINT SYSTEM (SAFETY BELT)
8-1 - Attachment of safety harness.
Note:
Thread the buckles through the seat openings and make sure that the belt is securely fixed
to the seat
8-2 - Use of safety belt.
CAUTION!
Belts must be snug to children’s bodies and must not be twisted.
IMPORTANT!
Periodically check to ensure that the seat belt is securely attached to the stroller frame as
well as securely fastened. The seat belt straps must not be damaged, worn out or twisted!
9 - ADJUSTING THE BACKRESTS RECLINE POSITIONS
The backrests are adjusted by the belts on the backs.
10 – TRANSFORMING THE COT INTO SEAT
Fasten the belts on down side of the seats.
11 – TRANSFORMING THE SEAT INTO CARRY COT
CAUTION!
The carry cot must be installed only in rearward position.
IMPORTANT!
Before using the cots, you must remove the safety belts from the seats. You can put in
the cot a mattress not thicker than 15 mm.
12 – ADJUSTING SEATS POSITIONS
13 – POSITIONS OF SEAT/CARRY COT ON THE FRAME
Press the seat release buttons and remove it from the frame. Place the seat on the frame in rearward of
forward position. Press down until you hear a click.
Note:
Make sure the seat is securely fixed to the frame!
14 – FOLDING THE STROLLER
CAUTION!
Engage the parking device and empty the storage baskets before folding the stroller.