MCDV2 Motorcycle DVR 3
It is recommended that you reformat the micro-SD card, at least once
every three (3) months to ensure best use.
Ÿ
The device is designed to record and store important data.
It should be installed safely and securely under the motorcycle’s seat
(recommended), where it will be out of the weather (rain and dust) and is
protected from tampering or theft.
Carefully check the parts of the MCDV2 dashcam kit, as you remove them
from the box:
Ÿ
The MCDV2 itself (“the device”), which is the core of the kit
Ÿ
A mounting bracket for the device
Ÿ
Two (2) video cameras, each with extension cables and mounts
Ÿ
A handlebar controller (large red buttons), designed to be mounted on
the handlebars using touch-tape (Velcro™), with input splitter cable to
connect the controller to the main power unit
Ÿ
A GPS receiver (to record location and time)
Ÿ
A power supply cable
Ÿ
USB test and charge cable
USB to micro-SD card adaptor
It is highly recommended that the kit is assembled and tested in the
workshop prior to installation on the motorcycle to ensure a clear
understanding of the layout, connections and functions.
Your new micro-SD card should come formatted ready for use in the device.
The card may be formatted in the device if required. (Note: To preserve the
correct operation of the micro-SD
card we strongly recommend that the
card is reformatted on a regular
(three (3) month) basis.
Hold the device the right way around,
and carefully insert the micro SD card
as shown.
You can do that now.
