7
when there is a load.
It is strictly forbidden to try to disassemble
the photovoltaic module, and it is strictly
prohibited to remove the nameplate of the
photovoltaic module or other parts on the
photovoltaic module; it is strictly forbidden
to paint or apply any adhesive on the surface
of the photovoltaic module;
It is strictly forbidden to drill holes in the
frame of the photovoltaic module.
It is strictly forbidden to scratch the
anodized layer on the surface of the
aluminum alloy frame, except when it is
connected to the ground. Scratches may
cause corrosion of the frame, affecting the
frame's load-bearing capacity and long-term
reliability.
If the photovoltaic module glass or other
packaging materials are damaged, please
wear personal protective equipment to
separate the photovoltaic module from the
site or the circuit. It is strictly forbidden to
touch wet photovoltaic modules, unless you
are wearing electric shock protection
equipment that meets the requirements.
When professionals replace or repair
photovoltaic modules, do not damage the
surrounding photovoltaic modules or their
support structures.
When cleaning photovoltaic modules, you
must follow the cleaning requirements of
photovoltaic modules.
The connectors must be kept dry and clean
to ensure that they are in good working
condition. Do not insert other metal objects
into the connector or make electrical
connections in any other way.
4
Handling and unpacking
If the photovoltaic module is not in use, please
do not open the product packaging. The goods should
be stored in a dark, dry and ventilated place. If the
photovoltaic modules are stored in an uncontrollable
environment, the storage time must be less than 3
months when the outer packaging of the photovoltaic
modules is kept intact.
It is recommended to take appropriate amount of
photovoltaic modules for unpacking according to the
project progress every day, and the unpacked
photovoltaic modules should be installed within a day.
After unpacking, the photovoltaic modules are stacked
on the ground. In severe weather such as heavy rain,
the photovoltaic modules may be immersed in water
for a long time and affect the reliability of the product.
In severe weather such as typhoons, photovoltaic
modules that have not been installed may also be
scraped away.
