background image

Cyclone 3

tent assembly

instructions

Cyclone 3

instructions de 

montage

IMPORTANT INFORMATION

 

Thank you for purchasing your 

new Chinook tent. We have 

designed and manufactured 

these tents to give years 

of trouble free enjoyment 

and use. To maximize the 

enjoyment of your tent, please 

read the following information 

and assembly instructions 

with care. 

  

Become familiar with your 

new Chinook tent at home

 

by assembling the tent 

at home before your first 

camping trip. After a long day 

of travel a campsite is not a 

good place to learn how to 

set up a new tent.

  

When selecting a campsite,

 

make sure that the area is 

flat, has good drainage and is 

free of sharp objects that may 

damage the tent.

 

 Carefully push each pole 

through the proper pole 

sleeve

. Never force the pole 

as this may cause damage to 

the sleeve or pole.

PLEASE USE

COMMON SENSE

  Erect your tent upwind away 

from campfires.

  Do not cook with open flames 

inside the tent. 

  Do not store flammables or 

refuel stoves or lanterns in 

your tent. 

FIRE WARNING

Your Chinook tent fabric is 

treated with a fire retardant 

but is 

NOT FIREPROOF

. If 

exposed to open flames or 

other ignition sources the tent 

may ignite and burn.

Tent

1.   Remove all parts from the tent bag. Spread the tent body with its floor on 

the ground and with the web/grommet loops in each corner. Be sure to 
clear the area of any sharp objects that may damage the tent fabric.

2.   Assemble all of the shock-corded poles. Carefully join each section to avoid 

damaging the rod ends.

3.   Using the tent body poles (167.5"/425 cm poles), insert the poles through 

the black mesh pole sleeves found along the top of the tent body.   Two of 
the poles run from the front corners of the tent body to the back corners, 
crossing in the center of the tent canopy. The third pole runs from one side 
of the tent to the other underneath the other two poles.

4.   Situated at each corner and at each side of the tent body are web stakeout 

loops with grommets attached. Working with one pole at a time, insert the 
pole tips into the grommet located closest to the tent.

5.  Attach all clips onto the poles.

Fly

1.   Spread the fly over the tent canopy making sure that the double door 

opening on the fly is located at the front door (largest door) of the tent body.

2.   Attach the Velcro tabs on the inner fly to the tent poles.
3.   Attach the fly to the tent body using the quick-release buckle/strap system 

at each corner.

4.   Adjust quick-release buckle/strap system for a more taut fly.

Pegging and Guylines

1.    Starting with the tent corners, place a peg through each web loop located 

along the floor of the tent body and peg out securely.

2.    Pull out the lower front of the vestibule away from tent and place a peg 

through each of the web loops and stake out securely.

3.   Located along the lower sides of the fly are shock-corded loops, peg each 

loop securely.

4.    There are delta guyline points with a grommet located on the outer surface 

of the fly. Attach a guyline to each point and fasten to a peg or other secure 
object making sure the guylines are taut.

5.    By staking and guying your tent 

a. the tent will be more stable in windy conditions
b. the fly will shed rain better 
c. air circulation to the inner tent will be increased

IMPORTANTE INFORMATION

 

Merci pour l’achat de votre 

nouvelle tente Chinook.  Nous 

avons dessiné et fabriqué nos 

tentes pour vour donner des 

années de plaisir sans maux 

de tête.  Pour maximiser votre 

plaisir, s.v.p. lire attentivement 

les instructions de montage 

et de soins à prendre pour 

conserver votre tente en bonne 

condition.

  

Familiariser vous avec votre 

tente Chinook

 en la montant 

au moins une fois dans la 

cour arrière chez vous avant 

votre excursion.

  

Quand vous choisissez votre 

emplacement pour monter 

votre tente,

 assurez vous 

d’un endroit plat, bien drainé 

et nettoyer de tous objets 

pouvant endommager votre 

tente.

   

Glisser soigneusement 

chaque tige dans sa gaine 

respective.

  Ne jamais forcer 

les tiges car cela pourrait 

causer des dommages à la 

pole ou à la gaine.

VEUILLEZ UTILISER VOTRE 
BON SENS

   Monter votre tente eloignée du 

feu de camp.

   Ne jamais cuisiner à l’intérieur 

de la tente. 

   Ne pas remiser de liquides 

inflammable dans votre tente. 

INFLAMMABILITÉ

 

Votre tente Chinook a été traité 

avec un enduit antiflamme 

mais n’est pas à l’épreuve du 

feu.  Une exposition directe à 

une flamme ou une source de 

chaleur excessive peut causer 

une incendie.

Tente

1.   Sortir toutes les composantes du sac de rangement.  Étaler le plancher 

de la tente sur le sol.  Assurez vous de bien nettoyer l’espace de tout objet 
pouvant endommager le plancher de tente.

2.   Assembler toutes les poles.  Prendre soin de ne pas endommager les 

embouts.

3.   Utiliser l’armature de tente (167.5"/425cm) et l’insérer dans la gaine 

noire située dans le faîte de la tente. Deux des tiges doivent être placées 
dans l’oeillet du coin avant à celui arrière. La troisième tige doit être placé 
d’un coin à l’autre de la tente passant en dessous des deux autres tiges.

4.   À chaque coin de la tente et de chaque côté il y a des attaches renforcies. 

Installer une tige à la fois, insérer l’embout de la tige dans l’attache la 
plus près de la tente.

5.  Attacher tous les crochets aux poles.

Double Toit

1.   Déployer le double toit en vous assurant que l’ouverture de la porte soit 

en avant de la tente.

2.   Attacher les “Velcro” du double toit à l’armature de la tente.
3.   Attacher le double toit à l’armature de la tente en utilisant les courroies 

d’attaches rapides.

4.   Ajuster les courroies d’attaches rapides pour un double toit bien tendu.

Piquets et Tendeurs

1.   Commencer par les coins de la tente, placer un piquet dans chacune des 

attaches renforcies tout autour de la tente et bien ancrer.

2.   Etirer vers l’extérieur la porte inférieure du vestibule et bien ancrer à l’aide 

des piquets dans chacune des attaches renforcies.

3.   Situé tout autour du double toit il y a les cordes élastiques qu’il faut bien 

ancrer à l’aide de piquets.

4.   À la surface extérieur du double toit il y a des points d’attaches delta avec 

oeillet.  Attacher un tendeur à chacun de ses oeillets bien ancrer et bien 
tendre le tendeur.

5.   Par un bon ancrage de votre tente

a) Votre tente sera plus stable par temps venteux
b) Le double toit évacura mieux la pluie
c) L’aération de la tente sera augmentée

cyclone3_TAI_2006.ID

11/2/06, 12:50 PM

2

Reviews: