14. REWINDING THE FILM
(Always avoid direct sunlight when unloading film).
After the last picture on the roll of film has been taken, the Film Advance Lever will stop. Do not
attempt to force the lever. [Mike: check the number of exposures taken]
1. Press the Film Rewind Release Button. It will remain locked into position (Fig. 36).
2. Pull up the Film Rewind Crank (but do not pull the entire knob up from its seated position) and
turn it in the direction of the arrow to rewind the film. When the film has been completely
rewound, the tension of the Film Rewind Crank is released and it will revolve freely (Fig. 37).
3. Now pull up the Film Rewind Knob fully and the Back Cover will open. Remove the film, push
the Film Rewind Knob back into position and close the Back Cover (Fig. 38).
* Never open the Back Cover during rewinding, as light will get in and ruin your film.
