－1－
INTRODUCTION
This instruction manual describes the specifications and operation of three built-in communications
interfaces (RS-232C, RS-422, and RS-485) of the SE3000 series field scanner.
The explanation of these interfaces is partly same. However, their differences are explained separately in
[For RS-232C] and [For RS-422A and RS-485]. Please read the required part carefully.
1. Other Instruction Manuals to be consulted
This instruction manual is for the communications interface only. For the installation, running and operation
of the SE3000, please refer to the following instruction manuals:
1. SE3000 series field scanner (Manual No. INE-300)
2. SC8-10 Line Converter (Manual No. INE-39)
* For your personal computer, refer to the instruction manual attached to it.
2. Caution Display
This manual contains explanation of precautions. Follow these precautions when operating and handling
the communications interfaces, otherwise the instrument maybe damaged, resulting in deterioration in its
performance, or operation failures may also occur.
(1)
The contents of this manual are subject to change without notice.
(2)
The contents of this manual have been prepared professionally.
However, if you have any questions, or notice of error or an omission of
descriptions found in this manual, please contact your nearest agent of
CHINO Corporation.
(3)
CHINO Corporation is not responsible for any results influenced by the
operation of this communications interface, irrespective of item (2)
above.
Caution
