INST.No.INE-378-P9CE
- 29 -
6.5.7-3 “Span” side adjustment : Adjustment by furnace temperature
at span side
1) To enter the span side temperature, press
SEL
key in the
engineering mode screen until “
SPAn
” appears in the sub
display as shown in the right figure.
2) By pressing
key, the most significant digit of the main
display will blink.
3) Use
△
or
▽
key to program the desired value.
4) To shift to the next lower digit, press
key.
The next lower digit will blink.
5) Repeat the above procedure of (3) and (4) up to the least
significant digit for programming (4 digits).
6) To activate this programming, press
ENT
key.
• The programmable range is
0
to
6280ºC
.
• The default is
the maximum temperature value
of the measuring range.
R emar ks
Tb
CONT
MEM
PEAK
AL
AH
C
F
ε
[Span side]
Sub display
Main display
