chinesport Bobath LB3 Series, Use And Maintenance Manual, Page: 6 / 30

CHINESPORT Spa - ITALIA
6/30 mod.14-2014.03.28-09.00-001-ml.docx
GB
conditions.
In addition :

Keep body parts away from moving parts and/or adjustments. These
areas are marked by labels.

Three, four or more people are required to carry the equipment.

Set the bed in its lower and horizontal position when it is not
supervised
.

Do not connect to an electric system that does not
comply with the current safety regulations.

Disconnect power supply before moving and carrying
out any service on the equipment circuits.

Pull out the plug (not the cable) to disconnect the power
supply and/or battery charger.

Make sure that the patient cannot accidentally operate the controls.

Make sure that during equipment operation any moving parts do not
knock against adjacent masses.

Keep a proper distance from moving mechanical parts.

Before operating the release levers of the sections, make sure their
weight can be supported.

Do not let the equipment come in touch with open flames.

Protect the padding in treatments involving heat sources.

Periodically disinfect the table’s leatherette.

Do not spill any liquids over the equipment.

Record any significant safety-related intervention/defect/damage in
the attached form.

For operations not covered in the maintenance list, please contact
Chinesport Service Centre.

Only the manufacturer can repair the actuators, gearcases, controls
and battery chargers, which on no account must be opened or
tampered with. Otherwise the manufacturer will be no longer
responsible for the equipment, whose warranty will cease to be
valid.

When safety is clearly in danger, immediately switch off the
equipment and do not use it until the danger has been eliminated.

Do not sit and do not concentrate the load on the ends of the couch,
especially on the adjusted leg and head section.
2.1 Collateral effects and contraindications
There is no collateral effects or contraindications during proper use, is recommended knowledge of
this instruction manual.
3 CONFIGURATED ITEM CODE
Product code
L B 3 * * * * * *
L B 4 * * * * * *
Variable code position 1 2 3 4 5 6 7 8 9