Chinavision CVSN-DV56, User Manual

Page: 8 / 20

8
5. Stick the recorder bracket onto the windscreen using the sticky-pad provided on the
bracket. Adjust the camera angle horizontally with the lens facing forwards. Tighten the
adjustment screws so that camera is held firmly. Adjust if necessary after viewing a
recorded video clip after you have tried the product for the first time.
6. Connect the Power Cable to the recorder and
ensure the power cable is tidy and out of the way
using provided cable fitting kit.
7. Connect the power cable to the Cigarette power
jack in the vehicle (DC 12V, 24V)
* Please ensure you use the enclosed power
cable in the package – do not use alternative
cables.
8. Start the vehicle engine and check all the LED’s on the recorder turn on . The Recorder
sounds will beep once and all the LED’s will turn on. After a few seconds, the ECO LED
will turn-off and the power LED will remain on. The unit is now ready and will be recording
automatically.
9. After test driving and recording for the first time, please check the recorded video clips on
a PC to ensure that it has recorded properly and your happy with the angle of the camera.
It is necessary to test the unit like this at least once before using this recorder on a daily
basis.