China Aerospace Telecommunications Ltd
29
/
44
7.6
、
Installation of SOS button
The SOS button should be placed between the dashboard and the
steering wheel to facilitate operation of the driver. The SOS button has
adhesive tape stuck to its back. At the time of installation, remove the
adhesive tape and attach it to the intended position. Refer to the following
diagram for the specific installation location:
7.7
、
Installation HT-196 driving behavior analyzer
When install the driving behavior analyzer, please don’t put under any
metal or explosion prevention metal ,Usually sorb the windshield or use
double faced adhesive tape to fix under the windshield .
Driving behavior analyzer to maintain the level place, and the ground shall
not exceed 15 degrees inclination.
7.8 Installation Temperature Sensor
Connect the sensor with Terminal‘s 485 port , head of the temperature
sensor need fix the suitable position .When we check the refrigerator of
truck , the metal tube is fixed at the ice box. The temperature detection has a
certain delay, suggest setting fixed upload interval20 seconds.
7.9 Installation Fuel Sensor
1、When installation fuel sensor ,end-users can to cut short the relay as
they need ,the step as below : end-users need confirm the wire distance of the
relay ,and cut short the remain ,clear the wire port , eliminate no useful parts
and re-install the sensor .
2.True up the Fuel sensor to check empty and full oil box ,the basic theory
is record the data when it is empty oil box and full oil box ,confirm the