ChimneyFree 23TF10316 Manual Download Page 2

2

MAXIMUM LOAD 90 lb. (40.8 kg)

MAXIMUM LOAD 15 lb. (6.8 kg)

MAXIMUM LOAD 15 lb. (6.8 kg)

CAUTION:

 This unit is intended for use only with the products and maximum weights indicated. Use with other products or products heavier 

than the maximum weights indicated may result in instability causing possible injury.

NOTE: 

Flat Panel TVs with base support should be placed squarely in the center of the stand with no overhang on any side.

Maximum Load Warning ........................................... 2

Safety Information ..................................................... 3

Warranty ..................................................................... 5

Pre-Assembly ............................................................. 6

 Hardware 

Included 

................................................... 6

 Product 

Specifi 

cations 

.......................................................

6

   

       Tools Required ...................................................................

6

 Package 

Contents 

..............................................................

7

Assembly .................................................................... 8

Operation ................................................................. 17

FCC/IC Information

 .........................................................

19

 

Care & Cleaning ....................................................... 19

Troubleshooting ....................................................... 20

Replacement Parts .................................................. 22

Maximum Load Warning

Table of Contents

Summary of Contents for 23TF10316

























Reviews: