10G Core Routing Switch User Manual
陈泽科技有限公司
- - 5 - -
www.stephen-tele.com
Step 3: The switch is powered on. Display self-test information of the switch and prompt you to press Enter to show
the command line prompt such as switch>.
Step 4: Input a command to configure the switch or view the operation state. Input a “?” for an immediate help. For
details of specific commands, refer to the following chapters.
2.2.
Setting up Configuration Environment through Telnet
2.2.1.
Connecting a PC to the Switch through Telnet
After you have correctly configured IP address of a VLAN interface for an switch via Console port, and added the port
to this VLAN (using port command in VLAN view), you can telnet this switch and configure it.
Step 1: Authenticate the Telnet user via the Console port before the user logs in by Telnet.
Step 2: To set up the configuration environment, connect the Ethernet port of the PC to that of the switch via the LAN.
Figure 2-5
Setting up configuration environment through telnet
Step 3: Run Telnet on the PC and input the IP address of the VLAN connected to the PC port.
Figure 2-6
Running Telnet
Step 4: The terminal displays “Login:” and prompts the user to input the logon user name and password. After you
input the correct user name and password, it displays the command line prompt (such as switch#).
