STCS5024 Full Gigabit Layer 3 switch Installation Guide
- - 15 - -
www.stephen-tele.com
Stable and Portable Route Operating System(SPROS) Boot
Copyright(c) 2002-2010,Any-RB0
Complied in April 2004
Version 4.50
System start-up time Sep 16 2004, 11:06:37
Press any key to enter rom mode.
asks if the user wants to enter BOOT menu. 3 seconds are given for your selection:
If you press any key within the 3 seconds, the program will access the BOOT menu.
If you do nothing within the 3 seconds, system will enter the auto-booting state when the time prompt for instruction
waiting becomes 0.
The auto-booting interface of the system is as follows:
auto-booting...
Loading /rfa1/SPROS_KERNEL_010.Z ... Uncompressing 2393601 bytes...
Loading image... 10441888
Booting ......................................
Aux Port Init 100 half down ................... OK
No inet address specified for interface dc.
Switch Firmware Init ........................... OK
Check Timebase: 16.500126 MHz ................... OK
Check PCI: 33.000252 MHz ........................ OK
Check CPU: 198.001512 MHz ....................... OK
Switch Firmware Init ........................... OK
Layer 2 Application ............................. OK
Layer 3 Application ............................. OK
Entering SPROS ......
Initializing environment ...... Done.
Loading startup config ...... Done.
