STCS4012 Series Layer 3 Switch Installation Guide
- - 12 - -
www.stephen-tele.com
Windows95/Windows98/ Windows NT.
Step 2: Set terminal parameters (taking Windows98 hyper terminal parameter settings as an example.
Set the baud rate to 9600, the data bits to 8, parity check to none, stop bit to 1, flow control to none, and terminal emulation to
VT100. The specific means is as follow:
1) Click [Start-Program-Accessories-Communications-Hyper Terminal] to enter the Hyper Terminal window in which click icon
to establish a new connection and the system will pop up the connection description interface as follow.
Figure 5-2
Connection description interface of HyperTerminal
2) Key in the name of the new connection in the connection description interface and click <OK>, the system will pop up the
following interface picture. Select the serial port to be used from [Connect using].
