Installation Overview
1. READ THIS MANUAL IN IT’S ENTIRETY BEFORE PROCEDING.
2. Verify the thermostats used with the existing radiant heating
controller are capable of a cooling setting. If not, augment or
replace the thermostats. Consult with the radiant cooling controller
manual to see how to connect any new or additional thermostat or
call Chiltrix technical support for assistance. Radiant cooling control
can be configured to work with nearly all radiant controllers.
3. Install sensor well and PT100 sensor fitting.
4. Install the controller CXRC1.
5. Install supply-return cross connect and proportional mixing valve.
6. Install dew point sensors, run cabling, connect CAT6 cables to all
dew point sensors to the controller according to this manual.
7. Connect all wiring according to this manual.
8. Determine and install optional customer-provided alarm output
device.
9. Configure controller according to the Chiltrix radiant calculators
particularly using the “Surface temperature” tab.
10. Test system operation.
5
