21
Do not over-tighten the screws so that the brackets can be adjusted with a spirit level (fig. 15).
Then fully tighten the four screws to block the two brackets. Mount the unit, checking that it fits
correctly onto the brackets and that it is stable Fig 16.
(fig. 15)
(fig. 16)
Mount the Indoor Unit Level on the Wall
Wall mounting
1.
Using the paper template, position the connecting pipes, the condensate discharging
pipe and the wall box, including the power supply cable. Then mount the fastening
bracket, according to the holes on the template.
2.
The bracket must be fastened to the wall by the expansion screws included. To fasten
the appliance to a wooden wall, use suitable screws.
3.
Drill the holes in the wall and fasten the bracket without tightening the screws.
4.
Use a level to position the bracket properly (level).
5.
Tighten the four expansion screws.
6.
Make sure that bracket are stable, by pushing it sideways, upwards and downwards.
7.
Mount the unit on the bracket.
Summary of Contents for CXI120
