Chilli Penguin Penguin 7 Convector, Installation And Operating Manual, Page: 22 / 56

Special care should be taken when installing a stove so that the requirements of the
Health and Safety at Work Act are met, with particular attention to the following.
Lifting and handling: adequate facilities must be available for loading, unloading and
handling
Fire cement:
some types of fire cement are caustic and should not come into contact
with the skin. In case of contact, wash immediately with plenty of water
Asbestos: our stoves do not contain asbestos. If there is any possibility of disturbing
asbestos in the course of installation, please seek specialist guidance and use
appropriate protective equipment
Metal parts: when installing/servicing this stove take care to avoid the possibility of
personal injury
3.b Health and Safety Precautions
3. Installation Instructions
All local and national regulations must be observed when installing the appliance. If
installed incorrectly serious accidents can be caused.
Building Regulation Document J must be referred to when installing this appliance.
It is the installer’s responsibility to ensure the manufacturer’s instructions are complied
with. A HETAS qualified installation engineer should carry out the installation and issue
a compliance certificate. In addition, they should complete the commissioning checklist
at the back of this manual. If a HETAS installer is not installing your stove your local
Building Control department needs to inspect the installation and register the work
carried out.
3.a
Warning
A safe penguin
is a happy penguin
Page 19 of 52 www. chilli penguin.co.uk