Chilli Penguin Chilli Billie, Installation And Operating Manual

Page: 18 / 46

If the structure that the Chilli Billie is being installed in has a non-permanent shell or floor
we recommend a solid base for the enclosure. This is to provide a stable level base of
support for the stove and flue system. This base should be placed directly onto the ground
rather than on top of a superficial floor surface and should be completely level. This is to
avoid any possibility of disturbance to flue joints/stove by foot traffic.
• The stove should be fixed to the enclosure or hearth
• The enclosure if used, should be fixed to the floor or hearth
• combustible materials, including wood should not be stored either within the enclosure
or within the designated hearth area.
3.l Hearth (Glamping or Leisure Accommodation)
HEARTH REQUIREMENTS NON DOMESTIC SUMMARY TABLE
Chilli Billie, no enclosure
12mm superimposed, placed on flat level
stable ground, stove fixed to hearth
(Stove anchor plate available)
Chilli Billie in enclosure
Hearth is integral to enclosure, stove
fixed to enclosure & enclosure fixed to
floor (Stove anchor plate available)
Hearth in front of stove 225mm
Hearth both sides of stove 150mm
Do not place soft furnishings within 1150 mm of the stoves.
Spares are available through your local Chilli stockist or
our online shop. There are diagrams online to help you
identify the correct parts and advice about how to fit:
www.chillipenguin.co.uk/FAQ/looking-after-your-penguin
Page 16 of 43