26
Help
8. Help
Display
No display
•
Try recharging the battery pack.
•
Reset the Units. Unplug both the Units’ electrical power, then plug them
back in.
•
Is the Unit switched on
?
•
Press and hold the ON/OFF button on the Parent Unit for 3 seconds
to switch it ON.
•
Is the correct camera selected
?
Change the camera number, if
necessary.
•
Is the video display turned on
?
Press the once the ON/OFF button to
turn it ON.
•
When operating using batteries only, the display will go blank after
5 minutes or 30 minutes or 60 minutes to save power (depending on
video settings). The Unit is still active and will give you audio alerts. You
can reactivate the screen by pressing any button.
Registration
If the Baby Unit has lost its link with the Parent Unit
•
If the Baby Unit is too far away it may be going out of range, so move
the Baby Unit closer to the Parent Unit.
•
Reset both the Parent Unit and Baby Unit by disconnecting them from
the electrical power. Wait about 15 seconds before reconnecting.
Allow up to one minute for the Baby Unit and the Parent Unit to
synchronize.
•
See 2.3 Registration (Pairing), if there is a need to re-register the units.
