14
Getting Started
2.4 Desktop Stand of the Parent Unit
•
The parent unit comes with a desktop stand attached to the back of
the parent unit.
•
To place the parent unit on a desk, simply pull out the stand, as shown.
NOTE
2.5 Registration (Pairing)
The Baby Monitor is pre-registered to your Parent Unit. You do not need to
register it again unless the Baby Unit loses its link with the Parent Unit.
To re-register your Baby Unit, or register a new Baby Unit, follow the
procedures below:
•
Press the
button and the menu bar will pop up.
•
Press the
LEFT/ RIGHT buttons until
is highlighted, and the scan
,
view
, add
, del
menus will pop up.
•
Press the
UP / DOWN buttons to select add and press the
OK
•
Camera
will pop up.
•
Press the
UP / DOWN button to select the desired Camera and
press the
OK
button to start searching for a camera unit.
Note:
If a camera is currently paired with the Parent Unit, its camera
location (with a * against it) cannot be selected for a new registration.
•
Press and hold the
PAIR
button on the underside of the Baby Unit until
PAIR OK
appears on the
screen. The video from the camera will then appear.
NOTE
A camera can only be registered to one Parent Unit at any one time.
