7
Twin Bed Conversion
Figure 8
AB20030_G12A
End Panel Headboard
M
(now becomes
Twin Bed Headboard)
Flat edge will face
outward.
Bed Rail Kit
(purchased separately)
End Panel Footboard
L
(now becomes
Twin Bed Footboard)
Curved edge will face
outward.
Allen Bolt
H
and
Connector Nuts
F
can be used to fill the
empty holes where
Stationary Side Assembly
K
had been attached.
Install one of each item
from opposite sides of
posts and thread items
together securely with
Allen Wrenches
A
.
Allen Bolts
J
will attach
Bed Rails (two (2) at
each post).
These bolts will thread into
Joint Connector Nuts
I
which
will be installed inside face
of Bed Rail.
If the crib is no longer needed for the child, then
this crib can be converted to a Twin Size Bed. To
complete the conversion, a Bed Rail kit must be
purchased from Foundations.
The crib should be disassembled with all parts
stored away except for the following:
1 End Panel Footboard (L)
1 End Panel Headboard (M)
8 Joint Connector Nuts - 6 mm (I)
8 6mm Allen Head Bolts (J)
Follow the assembly process outlined in the
assembly instructions included with the Bed Rail kit.
Maintenance Cleaning and Storage
MAINTENANCE:
Upon completion of the assembly, check to make sure all screws, bolts and connectors are tightened and
secure.
Periodically check crib for damaged hardware, loose joints, missing parts or sharp edges before and after
assembly and frequently during use.
DO NOT use crib if any parts are missing or broken.
If any parts are missing, broken or you need Assistance DO NOT return crib to your dealer.
Call Foundations® at 330.722.5033 and include model identification numbers recorded on page 1.
DO NOT substitute parts.
CLEANING:
Mix a mild solution of gentle dish washing soap and water, apply to surface using a clean cloth lightly
dampened in the solution. Rinse well with clear water using a soft clean cloth, then dry all surfaces with a
soft dry cloth.
DO NOT use abrasive cleaners or any cleaners with harsh chemicals that would contact a child’s
skin, scouring pads, steel wool or coarse rags. This crib should be treated the same as any fine
furniture.
STORAGE:
When storing crib use Caution as extreme temperature or humidity changes could be harmful.
Use caution when a vaporizer is in use. Always aim vapor stream away from crib as well as away
from any wood furniture item.
After completing the assembly the user is advised to read and be aware of
ALL WARNINGS, CAUTIONS, CLEANING, STORAGE USE AND MAINTENANCE notices in these
directions and printed on the storage pouch on the crib spring. A printed pouch is attached to the
crib spring for the permanent storage of the assembly directions. Please place the complete set of
assembly directions into the pouch for future referral. We caution the user to Not place excess
hardware in the pouches as it could present danger to the child if retrieved.
