background image

 

 

 

 

 

    H04755:11/08

6    

WARNING (For Toddler Bed)

!

• 

Infants have died in toddler beds from entrapment and strangulation. Failure 

to follow these warnings and the assembly instructions could result in serious 

injury or death.

• 

NEVER use bed with children under 15 months.

• 

NEVER place bed near windows where cords from blinds or drapes may strangle 

a child.

• 

DO NOT place items with a string, cord, or ribbon around a child’s neck, such as 

hood strings or pacifier cords.

• 

DO NOT suspend strings over a toddler bed for any reason.

• 

The users maximum weight shall not be greater than 50 lbs. (22.7 kg).

• 

The mattress intended for use on the bed shall be a full-size crib mattress having 

minimum dimensions of 51-5/8 in. (1310 mm) in length and 27-1/4 in. (690 mm) in 

width and 4 in. (100 min) in thickness, but not to exceed 6 in. (150 mm).

• 

Mattress  MUST  be  moved  into  lowest  position  for  proper  positioning  behind 

stretcher. It is very important that Stretcher 

T

 is used to prevent the mattress from 

moving and creating a gap between the mattress and the bed which could result 

in entrapment of the child. Failure to install this part could result in serious injury 

or death.

• 

This crib contains all components necessary to convert to a toddler bed. However, 

a guardrail may be available for purchase to provide additional security. Contact 

Foundations

®

 

for assistance. Refer to maintenance section for contact information.

Summary of Contents for Crib'n'Double Bed 34801










Reviews: