Chiko L-Foot Kit Installation Instructions Download Page 4

Page: 4 / 4

8” - 18”

4”-7”

Please read and follow the installation manual.

This manual is for a non-integral module or panel, assemble it to be mounted

over a fire resistant roof covering rated for application.

Re-inspect the installation for loose components, loose fasteners and any

corrosion, such that if found, the affected components are to be immediately replaced.

Rail spacings are as follows:

- When mounted in portrait rails may mounted 8” to 18” from the module edge.

- When mounted in landscape rails may be mounted 4” - 7” from module edge.

Chiko Solar passed UL System Fire Class A with Type 1 and Type 2

Chiko Solar will provide a 10 year limited warranty for all components.

For additional information please contact us:

Shanghai CHIKO Solar Technology Co., Ltd.

www.chikosolar.com www.chikolar.com

No.680 Xingwen Road, Jiading District, Shanghai 201815 China

Tel: +86-21-59972267

Summary of Contents for L-Foot Kit

Page 1: ...LISTED LISTED UL 1703 L Foot Kit Available in Clear Black...

Page 2: ...ity Please follow this installation manual for proper installation Use a chalk line to mark the roof Locate the beams of the roof using a stud nder Drill a single pilot hole Back ll the pilot hole wit...

Page 3: ...tilting it in the opening on the top of the rail Fasten and install at all locations where to modules meet 10 Ft Lb Locations of mid clamps can be determined by panel manufacturer datasheet Insert En...

Page 4: ...to be immediately replaced Rail spacings are as follows When mounted in portrait rails may mounted 8 to 18 from the module edge When mounted in landscape rails may be mounted 4 7 from module edge Chik...